{"id":343,"date":"2020-09-17T22:12:00","date_gmt":"2020-09-17T12:12:00","guid":{"rendered":"http:\/\/www.vk1zdj.net\/?p=343"},"modified":"2020-09-18T12:37:50","modified_gmt":"2020-09-18T02:37:50","slug":"heathkit-hd-1416-code-practice-oscillator","status":"publish","type":"post","link":"https:\/\/www.vk1zdj.net\/?p=343","title":{"rendered":"Looking at the Heathkit HD-1416 Code Practice Oscillator"},"content":{"rendered":"\n<p>Today my Heathkit Code Practice Oscillator arrived.  I was lucky enough to pick it up on eBay for a song, but the shipping took forever.<\/p>\n\n\n\n<p>Anyway, it&#8217;s a beautifully constructed unit, built from a multivibrator circuit, based around two heathkit labeled 417-801 NPN transistors, and a class A amplifier using a 417-213 transistor.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"1024\" height=\"570\" src=\"http:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/HD1416schem-1024x570.jpg\" alt=\"\" class=\"wp-image-342\" srcset=\"https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/HD1416schem-1024x570.jpg 1024w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/HD1416schem-300x167.jpg 300w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/HD1416schem-768x427.jpg 768w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/HD1416schem-80x45.jpg 80w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/HD1416schem.jpg 1091w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p> The original heathkit labeled transistors are really rare today.  Heathkit used their own inhouse part numbers which don&#8217;t mesh with industry equivalents.  According to a later manual I have located for the unit Q1 and Q2 can be replaced by MPSA20 (Vce 40V, Ic 100ma, hfe 40-400, PD 625mW) and Q3 can be replaced by a 2N5249A  (Vce 50V, Ic 100ma, hfe 40-800, PD 330mW) . It is ironic when you look at the specs that Q3 in the amplifier has a lower power dissipation spec than the miltivibrator transistors.<\/p>\n\n\n\n<p>All components were original from the early 70&#8217;s when the unit was originally constructed.  One variable with Heathkit projects is that they were assembled by the purchaser, so the quality can be unknown &#8211; In this case, it was beautifully put together.  Here are a couple of photos showing its construction.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"569\" height=\"609\" src=\"http:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.56.45.jpg\" alt=\"\" class=\"wp-image-330\" srcset=\"https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.56.45.jpg 569w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.56.45-280x300.jpg 280w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.56.45-80x86.jpg 80w\" sizes=\"(max-width: 569px) 100vw, 569px\" \/><\/figure>\n\n\n\n<p>Its fascinating when you look at this to realise that when these were first introduced in 1975, they sold for $9.95, including an inexpensive key and when they were advertised in 1990, they sold for $24.95.  I believe that even at Jaycar prices, there is still more than $25 worth of parts here.  Here is a photo from the 1979 Heathkit catalogue.<\/p>\n\n\n\n<div class=\"wp-block-image\"><figure class=\"aligncenter size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"483\" height=\"637\" src=\"http:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/HeathkitCatalogDec1976_Page_073.jpg\" alt=\"\" class=\"wp-image-357\" srcset=\"https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/HeathkitCatalogDec1976_Page_073.jpg 483w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/HeathkitCatalogDec1976_Page_073-227x300.jpg 227w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/HeathkitCatalogDec1976_Page_073-80x106.jpg 80w\" sizes=\"(max-width: 483px) 100vw, 483px\" \/><\/figure><\/div>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"1024\" height=\"576\" src=\"http:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.57.08.jpg\" alt=\"\" class=\"wp-image-339\" srcset=\"https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.57.08.jpg 1024w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.57.08-300x169.jpg 300w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.57.08-768x432.jpg 768w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.57.08-80x45.jpg 80w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><figcaption>Good component dress<\/figcaption><\/figure>\n\n\n\n<p>In the image above, there are unused terminals labeled ST and GND &#8211; These are across the key input, and can be used for direct connection to your station radio.  An interesting aspect of these keyers is that a Single diode in the supply line allows it to support Grid Block Keying for valve based transmitters, up to a maximum of -400v.  Just parallel the oscillator across the keying input to the radio, paying attention to the polarity of the key.   <\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"716\" height=\"706\" src=\"http:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.58.07.jpg\" alt=\"\" class=\"wp-image-335\" srcset=\"https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.58.07.jpg 716w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.58.07-300x296.jpg 300w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.58.07-80x79.jpg 80w\" sizes=\"(max-width: 716px) 100vw, 716px\" \/><figcaption>Soldering is on-par.  Sadly the 40 year old foam that is used to support the PCB in the case is long past it&#8217;s best before date. <\/figcaption><\/figure>\n\n\n\n<div class=\"wp-block-image\"><figure class=\"aligncenter size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"409\" height=\"396\" src=\"http:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.57.27.jpg\" alt=\"\" class=\"wp-image-337\" srcset=\"https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.57.27.jpg 409w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.57.27-300x290.jpg 300w, https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-14.57.27-80x77.jpg 80w\" sizes=\"(max-width: 409px) 100vw, 409px\" \/><figcaption>Output transistor (417-213), but more interesting is the careful construction including the correct use of Spring washers underneath the nut connected to the negative key binding post.<\/figcaption><\/figure><\/div>\n\n\n\n<p>Headphone output simply connects the multivibrator output (Via the volume control) to the headphones, bypassing the output amplifier.<\/p>\n\n\n\n<p>Sidetone frequency is adjusted by changing the value of R3, the 500K tone potentiometer.  According to the Heathkit manual it is adjustable between 200 and 850Hz.  When I tested mine, it comfortably went to 1.5Khz.<\/p>\n\n\n\n<p>In all, it is a beautifully clean project, from an era when projects were beautiful and inexpensive. <\/p>\n","protected":false},"excerpt":{"rendered":"<p>Today my Heathkit Code Practice Oscillator arrived. I was lucky enough to pick it up on eBay for a song, but the shipping took forever. Anyway, it&#8217;s a beautifully constructed unit, built from a multivibrator circuit, based around&#8230; <\/p>\n","protected":false},"author":1,"featured_media":331,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"inline_featured_image":false},"categories":[6],"tags":[24,23,22,20,25],"jetpack_featured_media_url":"https:\/\/www.vk1zdj.net\/wp-content\/uploads\/2020\/09\/2020-09-17-15.07.40.jpg","_links":{"self":[{"href":"https:\/\/www.vk1zdj.net\/index.php?rest_route=\/wp\/v2\/posts\/343"}],"collection":[{"href":"https:\/\/www.vk1zdj.net\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.vk1zdj.net\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.vk1zdj.net\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.vk1zdj.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=343"}],"version-history":[{"count":7,"href":"https:\/\/www.vk1zdj.net\/index.php?rest_route=\/wp\/v2\/posts\/343\/revisions"}],"predecessor-version":[{"id":358,"href":"https:\/\/www.vk1zdj.net\/index.php?rest_route=\/wp\/v2\/posts\/343\/revisions\/358"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.vk1zdj.net\/index.php?rest_route=\/wp\/v2\/media\/331"}],"wp:attachment":[{"href":"https:\/\/www.vk1zdj.net\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=343"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.vk1zdj.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=343"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.vk1zdj.net\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=343"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}